E4 for Empty HPMC Capsules-manufacture,factory,supplier from China

MELLUTEL-SL400Application in the Self-levelingSelf-leveling mortar is a special dry mixed mortar product with self-leveling and self-compaction function; it is widely used in factories, hospitals, shopping malls, offices and well. Home furnishing and other places. MELLUTEL leveling  cellulose e ther products, after special process control, widely used in various cement and gypsum based leveling Product system.1. Prevent settlement, stratification, segregation, etc., and ensure the flow degree and operating time of self-leveling mortar2.

• Improve sag resistance & anti-slap• Optimize rheological behaviour, particularly the flow characteristics and workability• Enhance adhesion strength• Increase mortar yield• Cost-effective. Obtain desired thickening effect with very low dosage. MELLUTEL™ YT-10 is a modified Hydroxypropyl Starch ether with excellent performance.

ETON HPMC can make the honeycomb ceramic product have a very dense internal structure after combustion.The addition of ETON HPMC in the honeycomb ceramic has an obvious effect on the shape preservation of the green tire, which can ensure the dimensional accuracy of the product, ensure the uniformity of the wall thickness, and reduce the rejection rate.Specification           TypeItemHPMCMethoxy %28.0～30.0Hydroxypropyl %7.0～12.0Gel temperature ℃58.0～64.0Viscosity mPa.s4000,6000,8000,10000pH5.5～8.0Loss on drying %≤4.

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material.It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

Hydroxyethyl methyl cellulose is a odorless, odorless, non-toxic white powder that can be dissolved in cold water to form a transparent viscous solution.  It has the characteristics of thickening, adhesion, dispersion, emulsification, film formation, suspension, adsorption, gelation, surface activity, water retention and colloid protection.  Aqueous solutions can be used as colloidal protectants, emulsifiers and dispersants due to their surface active properties.  Hydroxyethyl methyl cellulose aqueous solution has good hydrophilicity, which is a highly efficient w

Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone,  HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

Our cellulose ethers use a unique technology that allows control of particle morphology. They achieve the ideal balance of water retention, even at high temperatures, while taking efficiency and workability to a new level.

Hydroxypropyl methyl cellulose is a non-ionic water-soluble cellulose ether widely used as a thickener, protective colloid, stabilizer, suspending agent and water-retaining agent in many construction applications.Structural formula  (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Modified products     TypeItemHPMCputtyYT100M  YT100MN  YT1365  YT150MSmortarYT200M  YT200MSSelf levelingYT400GypsumYT-7166   Specification  of non modified products     TypeItem60HPMCE65HPMCF7

Appearance is White to slightly off-white fibrous or granular powder.

Cellulose ether has a wide range of uses in the building materials industry.Can be used as retarder, water retention agent, thickener and binder.The most important roles of cellulose ether (especially HPMC and HEMC) in cement-based adhesives are water retention and thickening.In addition, due to its interaction with the cement system, it also plays an auxiliary role in entraining air, delayed coagulation and improving tensile bond strength.Structural formula (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3 Specification of non modified products   

Hydroxypropyl methyl cellulose is a non-ionic water-soluble cellulose ether widely used as a thickener, protective colloid, stabilizer, suspending agent and water-retaining agent in many construction applications.Structural formula  (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Modified products     TypeItemHPMCputtyYT100M  YT100MN  YT1365  YT150MSmortarYT200M  YT200MSSelf levelingYT400GypsumYT-7166   Specification  of non modified products &n

Main applicationHPMC is one of the main dispersants in PVC industry. During suspension polymerization of vinyl chloride, it can reduce the interfacial tension between vinyl chloride monomer (VCM) and water, and help VCM to be evenly and stably dispersed in the aqueous medium; Prevent the coalescence of VCM droplets at the initial stage of polymerization; Prevent coalescence between polymer particles in the later stage of the polymerization process. In suspension polymerization system, it plays a dual role of dispersion and stability protection.

HEMC are often used as water-retaining agents in (desulfurized) gypsum mortar. Years of research have shown that,water-retaining agent has a very important influence on the gypsum quality and anti-plastering layer performance of plastering gypsum.

HPMC is a multi-purpose medicinal material, can be used as thickener, dispersant, emulsifier and film-forming agent. Made in the drug tablet film coating, adhesive, can significantly improve the dissolution rate of drugs can enhance the waterproof tablets.

Appearance is White to slightly off-white fibrous or granular powder.

Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone,  HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.

Honeycomb ceramics are widely used in power generation, desulfurization and denitrification, and automobile exhaust gas treatment. With the advancement of technology, more and more thin-walled honeycomb ceramic technology is used.

Cellulose ether, especially hydroxypropyl methyl cellulose ether (HPMC), is an important component in commercial mortar. The effects of cellulose ether on cement-based materials include water retention, thickening, air entrainment and retardation, which are excellent in giving commercial mortar. At the same time, it also affects the macro and micro structure of cement hydration products, thus affecting the mechanical properties of commercial mortar. Cellulose ethers are usually divided into two categories: surface modification and non-surface modification.

Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone,  HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.

Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone,  HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid. It is effective in thickening, adhesion, dispersion, emulsification, suspension, adsorption, surface activity, water retention and so on.  ETON Hydroxypropyl starch ether is a kind of chemical modified starch mainly used as thickener and texturing agent for cement or gypsum based mortar products.

ETONse YT series starch ether is a kind of non-ionic starch ether products suitable for building materials system such as putty, tile adhesive and mortar after careful analysis of market demand by the R&D team of ETON.This series of products through the use of special reaction process and production process, so that the product has a series of performance advantages, in putty, tile adhesive and mortar applications have a unique advantage.Excellent workability: It has excellent workability in the application of internal and external wall putty and gypsum-based plastering.Good slip resistanc

Hydroxypropyl methylcellulose (HPMC), HPMC is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, can be dissolved in cold water but not in hot water, slowly in hot water Swells, peptizes, forms a viscous colloidal solution, cools to a solution, and accordingly becomes a gel when heated.