hpmc based coating-manufacture,factory,supplier from China

Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone,  HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

      MELLUTEL™ E5Hydroxypropyl Methyl Cellulose (HPMC) Product DescriptionMELLUTEL™ E5 is a non-ionic, dissolving in cold or hot water.

MELLUTEL™ PCH200MS is a white or off-white powder, odorless, tasteless and non-toxic. Soluble in a mixture of cold water and organic solvents to form a transparent viscous solution.

Hydroxyethyl methyl cellulose ether, referred to as HEMC, is a non-ionic cellulose ether obtained from natural polymer material cellulose through a series of chemical reactions. It is an odorless, tasteless, non-toxic white to off-white powder or granule, which can be dissolved in cold or hot water to form a transparent viscous solution, which has the functions of thickening, binding, water retention, dispersion, emulsification and film formation.

 It comprises cement, sand, limestone, HEMC and various additives, ready to be mixed with water before use.Adhesion Strength after drying of this tile cement should be more than 0.5N/mm2, and the dosage of HEMC is generally about 0.3 to 0.4% in dry mortar to reach this level.HEMC can effectively improve the rheology of plaster and significantly improve sagging phenomenon for latter plastering and reduce the shrinkage and crack formation.Structural formula                          

Hydroxypropyl methylcellulose (hpmc), hpmc is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, may be dissolved in cold water but not in warm water, slowly in warm water swells, peptizes, forms a viscous colloidal solution, cools to an answer, and for that reason turns into a gel while heated.

Food grade HPMC  , also abbreviated as hypromellose , is a kind of non-ionic cellulose ether. It is a semi-synthetic, inactive, viscoelastic polymer, often used in ophthalmology as a lubrication department, or as an ingredient or excipient in food additives, and is commonly found in various types of commodities.

Hydroxypropyl methylcellulose is a non-ionic water-soluble cellulose ether, which is made from plant fiber or natural polymer fiber through a series of chemical processes. It is odorless, tasteless, non-toxic white powder, soluble in cold water but insoluble in warm water, slowly swells and peptizes in warm water, forms a viscous colloidal solution, and cools into a solution.

Hydroxypropyl Methyl Cellulose (Mellutel YT-50) is beside Polyvinylalcohol (PVA) one of the most commonly used suspending agents. Mellutel YT-50 controls the particle size and their distribution, influences the porosity and defines the bulk weight of PVC. The porosity of the polymer particles is strongly linked to the property to adsorb additives like plasticizers or stabilizers. Thereby, the properties of the polymer during processing and of the final product can be controlled. Ultra low viscous Mellutel YT-50 is the most suitable product for PVC manufacturing processes.

HPMC(Hydroxypropyl methyl cellulose) is mainly used in the field of honeycomb ceramics. Honeycomb ceramics were first used to purify the exhaust gas of small cars. Now they have been widely used in chemical industry, electric power metallurgy, petroleum, electronics, electrical appliances, machinery and other industries. With the development of technology, more and more thin～walled honeycomb ceramics are used.

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

Hydroxypropyl methyl cellulose is a non-ionic water-soluble cellulose ether widely used as a thickener, protective colloid, stabilizer, suspending agent and water-retaining agent in many construction applications.Structural formula  (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Modified products     TypeItemHPMCputtyYT100M  YT100MN  YT1365  YT150MSmortarYT200M  YT200MSSelf levelingYT400GypsumYT-7166   Specification  of non modified products &n

HPMC has good dispersing, emulsifying, thickening, bonding, water and glue retention properties, and is used as thickener, dispersant, binder, excipient, oil resistant coating, filler, emulsifier and stabilizer.Structural formula  (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Modified products     TypeItemHPMCputtyYT100M  YT100MN  YT1365  YT150MSmortarYT200M  YT200MSSelf levelingYT400GypsumYT-7166   Specification  of non modified products     TypeItem60HPMCE65HPMCF75H

Hydroxyethyl methyl cellulose ether, referred to as HEMC, is a non-ionic cellulose ether obtained from natural polymer material cellulose through a series of chemical reactions. It is an odorless, tasteless, non-toxic white to off-white powder or granule, which can be dissolved in cold or hot water to form a transparent viscous solution, which has the functions of thickening, binding, water retention, dispersion, emulsification and film formation.

Hydroxypropyl methylcellulose (HPMC), HPMC is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, can be dissolved in cold water but not in hot water, slowly in hot water Swells, peptizes, forms a viscous colloidal solution, cools to a solution, and accordingly becomes a gel when heated.

The hydroxypropyl methyl cellulose ether hpmc is supplied with a water-repellent and thickening-presenting cellulose ether.Redispersible polymer powder growing the tile ceramic adhesion .The hpmc can substantially growth the power of the tile adhesive and enhance the stress, and growth the power.Structural formula (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3 Specification of non modified products          Type      ItemHPMCPD/PDSHPMCPK/PKSHEMCEM/EMSEM40MNon surface treatmentPD100MPD150MPD200MPK40M PK100M&

Hydroxypropyl methyl cellulose (HPMC) is a non-ionic cellulose mixed ether made from cotton and wood through alkalization, propylene oxide and methyl chloride etherification.

Hydroxyethyl methyl cellulose is a odorless, odorless, non-toxic white powder that can be dissolved in cold water to form a transparent viscous solution. The degree of substitution and modification of substituent, allows the different chemical properties and benefits after alkalization and etherification reactions with Sodium hydroxide,Cholromethane,and ethylene oxide.HEMC is better performance in terms of higher gel temperature and hydrophilicity rely on ethyl substituent groups.Structural formula (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3HE

ETONse YT series starch ether is a kind of non-ionic starch ether products suitable for building materials system such as putty, tile adhesive and mortar after careful analysis of market demand by the R&D team of ETON.This series of products through the use of special reaction process and production process, so that the product has a series of performance advantages, in putty, tile adhesive and mortar applications have a unique advantage.Excellent workability: It has excellent workability in the application of internal and external wall putty and gypsum-based plastering.Good slip resistanc

The hydroxypropyl methyl cellulose ether hpmc is supplied with a water-repellent and thickening-presenting cellulose ether.Redispersible polymer powder growing the tile ceramic adhesion .The hpmc can substantially growth the power of the tile adhesive and enhance the stress, and growth the power.Structural formula (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3 Specification of non modified products          Type      ItemHPMCPD/PDSHPMCPK/PKSHEMCEM/EMSEM40MNon surface&

Methyl Hydroxyethyl cellulose MELLUTEL is a odorless, odorless, non-toxic white powder that can be dissolved in cold water to form a transparent viscous solution.  It has the characteristics of thickening, adhesion, dispersion, emulsification, film formation, suspension, adsorption, gelation, surface activity, water retention and colloid protection.  Aqueous solutions can be used as colloidal protectants, emulsifiers and dispersants due to their surface active properties.  Hydroxyethyl methyl cellulose aqueous solution has good hydrophilicity, which is a high

Hydroxypropyl methylcellulose a propylene glycol ether of methylcellulose, provided in differing tiers of viscosity; used as a postponing and viscosity-growing agent and pill binder, coating, and excipient in pharmaceutical preparations, and implemented topically to the conjunctiva to defend and lubricate the cornea.Formula (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Specific application and viscosity rangeViscosityApplication60YT HPMC65YT HPMC75YT HPMCDrug core binder5050100Tablet isolation5～505～50Tablet film coating35～5035～5035～50Slow～release35～10035～10035～100film50～

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.